|
SANTOVAC®
Polyphenyl Ether
Fluids/Lubricants
Santovac Fluids LLC specializes in the development, manufacture and marketing
of "extreme environment" lubricants, fluids and greases. One family of
products offered by Santovac Fluids falls within the class called Polyphenyl
Ethers. PPE's are considered the choice lubricants for equipment that
operate within "extreme environments". These lubricants can withstand extremely
high temperatures and pressures and are resistant to chemical and radiation attack.
PPE's are used in ultra high vacuum diffusion pumps, in connectors as contact lubricants
and optical fluids in many photo-electrical applications.
SANTOVAC PRODUCTS
Some of the specific
products being produced and marketed today by Santovac Fluids LLC include the following:
High Temperature
Fluids/Lubricants
SANTOVAC 0S-105
SANTOVAC OS-113
SANTOVAC OS-124 *
SANTOVAC OS-138
SANTOVAC 5
SANTOVAC 5P ULTRA
SKYLUBRICANT 600
SKYLUBRICANT II
MCS-293
SANTOLUBES RP-907 (Formerly Known As TKO2)
* Meets MIL-L-87100
SANTOVAC 0S-105 Diphenyl Ether Fluid
Santovac OS-105 is a low viscosity, thermally stable diphenyl ether fluid. It
has very low volatility and preserves resistance to degradation from heat, oxygen
and chemical attack. OS-105 is designed for applications where ordinary hydrocarbons
and ester-based products would not offer adequate thermal and oxidative stability
to the end product. It can be used for applications requiring a broad operating temperature
range from -40°C to +200°C. Typical applications include high performance
grease base-stock, or component, connector lubricants, compressor lubricants, bearing
lubricants and vapor phase lubricants.
SANTOVAC
OS-113 Diphenyl Ether Fluid
Santovac OS-113 is a high viscosity, thermally stable diphenyl ether fluid. It
has very low volatility and preserves resistance to degradation from heat and oxygen. OS-113
is designed for applications where ordinary hydrocarbons and ester-based products
would not offer adequate thermal and oxidative stability to the end product. It
can be used for applications requiring a broad operating temperature range from -40°C
to +250°C. Typical applications include high performance grease base-stock,
or component, connector lubricants, bearing lubricants and vapor phase lubricants.
SANTOVAC OS-124
Polyphenyl Ether Lubricant/Fluid
This unique lubricant/fluid was developed for extreme environments. It possesses
extraordinary resistance to degradation from heat, oxygen, radiation, hydrolysis,
and chemical attack. It is non-toxic and requires no special handling.
OS-124 is non-migrating
(stays where it is applied) and it is compatible with most metals, plastics and elastomers.
Applications for this lubricant fluid include high temperature hydraulic and heat
transfer fluids, lubricants for electronic components, connectors and equipment,
power plants, medical devices, various types of bearings, and high temperature greases.
SANTOVAC OS-138
Polyphenyl Ether High Temperature Lubricant
OS-138 is an advanced polyphenyl ether compound having a higher molecular weight
than that of OS-124. This physical property allows OS-138 to be used at
higher temperatures in certain applications.
SANTOVAC 5 Vacuum
Pump Fluid
Santovac 5 Polyphenyl Ether is a vacuum diffusion pump fluid which operates efficiently,
economically and safely to produce ultra-high vacuums of 4 x 10-10 torr,
and higher, at 25°C. Diffusion pumps are the most economical and reliable means
of reaching these low pressures and Santovac 5 has proven to be the best pump fluid
available for this type of equipment.
SANTOVAC 5P Ultra
Vacuum Pump Fluid
This is an advanced high purity diffusion pump fluid used in critical applications
requiring contamination-free ultra-high vacuum environments. Santovac
5P Ultra accomplishes this requirement through its extremely low back streaming characteristic,
a result of the fluid's very high purity.
SKYLUBRICANT
600 (or SKYLUBLUBRICANT I) Aviation Fluid
This is a high temperature hydraulic and heat transfer fluid used in certain
types of aircraft.
SKYLUBRICANT
II Aviation Fluid
Skylubricant II is an advanced aviation fluid and lubricant recently developed
for extreme aerospace environments.
C-ETHER or MCS-293
Lubricant/Fluid
This unique compound is referred to as a Polyphenyl Thioether. It has been used
as a jet engine lubricant, vapor phase lubricant, high temperature grease base-fluid
etc. for improved equipment performance, fire safety and fatigue life.
HIGH TEMPERATURE
GREASES
High Performance
Greases
SANTOVAC 5 GB, HIGH TEMPERATURE
SANTOVAC 6 GB, HIGH VOLTAGE, CLEAN ROOM
SANTOVAC 7 GB, CLEAN ROOM
SANTOVAC 8 GB, SILVER CONDUCTIVE GREASE
SANTOVAC® Electrical
Contact Connector Lubricants
Santovac® Connector Lubricants have a 30-year history of commercial service
for connectors with precious and base metal contacts in telecom, automotive, aerospace,
instrumentation and general purpose applications. Many billions of contacts
have been protected by Santovac-PPE's or Polyphenyl Ether ( OS-124®, OS-138®
) based lubricant formulations. A highly stable, non-spreading film (
15-20 microns) is formed on connectors/terminals. This affords long-term
lubrication and protection even when the connectors are exposed to aggressive atmospheres. Santovac
Connector Lubricants reduce insertion force, minimize wear and maintain low and stable
contact resistance. In addition these lubricants eliminate all forms of
corrosion including "fretting corrosion". These lubricants will
continue to work for decades or the life of the equipment. An ultraviolet
dye is incorporated in all Santovac Connector Lubricants for easy identification
during quality control inspections. PPE's have been certified by Telecordia
/ Bellcore, AT&T, and Bell Labs. The following Santovac Connector
Lubricants are widely used and specified by major OEM's:
Santovac
Connector Lubricants
Santovac
OS-124 |
A highly stable, medium
viscosity non-migrating lubricant for all metal contacts at high temperatures.
Approved by leading telecommunication and connector OEM's.
Temperature Range: -30 to +350°C |
Santovac
OS-138 |
A highly stable, high
viscosity, non-migrating lubricant for all metals especially gold contacts at very
high temperatures.
Approved by leading telecommunication and connector OEM's
Temperature Range: -20 to +350°C |
Santovac
MCS-293 |
A highly stable, low
viscosity, non-migrating lubricant for low and high temperature applications.
Temperature Range: -40 to +235°C |
Santovac
OS-105 |
A non-migrating oxidatively
stable lubricant for tin-lead connectors.
Temperature Range: -40 to +200°C |
Santovac
OS-113 |
A non-migrating oxidatively
stable lubricant for tin-lead connectors.
Temperature Range: -40 to +250°C |
Santovac
ACCL
Products |
Formulated Products
Temperature Range: -50 to +350°C |
Radiation Resistant
Fluids and Greases
In environments exposed to significant radiation the choice of lubricant becomes
critical, particularly when the radiation consists of short-wavelength, highly energetic
ionizing radiation such as gamma rays, x-rays, and subatomic charged particles. Polyphenyl
Ether based lubricants are not damaged by such radiation up to 1011 ergs/gram,
while other hydrocarbon-based lubricants turn to viscous gels.
PPE based lubricants
are, therefore, widely used in nuclear power plants, space satellites, nuclear submarines,
food sterilization equipment, radiation chemistry laboratories and medical imaging
systems.
| Radiation Resistant
Lubricants and Greases |
| |
|
| LUBRICANTS |
GREASES |
| SANTOVAC OS-124 |
SANTOVAC RR-24 |
| SANTOVAC OS-138 |
SANTOVAC RR-38 |
| SANTOVAC MCS-293 |
SANTOVAC RR-93 |
Optical Gels
and Fluids
Santovac® Polyphenyl Ether based transparent optical fluids are chemically
inert, synthetic polymers designed for sensitive photonics and electro-optics. These
materials are designed to have excellent purity and thermo oxidative stability, ultra-low
volatility, and radiation stability. We offer standard fluids with refractive index
ranging from 1.62 to 1.67 to index match with AR coatings such as MgF2
and silica. These optical fluids are also sold under the SantoLight trade names.
OPTICAL GELS
AND FLUIDS
SANTOVAC SL-5262
SANTOVAC
SL-5267
SANTOVAC
SL-1259
SANTOLUBES® RP-907 (FKA TKO2)
Long Term Rust Preventative, Cleaner and Lubricant
Santolubes
RP-907 (FKA TKO2) is a barium free, non-staining, water displacing, long-term
rust preventative, cleaner and lubricant. It penetrates and spreads rapidly to applied
areas. Santolubes RP-907 forms a thin highly protective film on ferrous metals
that protects surfaces from atmospheric corrosion even under conditions of
high humidity.
Advantages:
- Long term rust
and corrosion protection
- Contains no petroleum
solvents or barium compounds
- Strong water displacing
ability
- Thin film resists
oxidation
- Cleans and lubricates
parts easily
- Reduces friction,
increases parts life
- Environmentally
safe and biodegradable
- Meets MIL-L-63460
Read
Case History Article
Purchase SANTOVAC
Products Online
SANTOVAC Fluids LLC offers its products for online purchase. Please click here
to purchase SantoVac products
online.
Purchase SantoVac Products
Related Products
and Websites
Findett
LLC
Santotrac
Traction Lubricants
|